Good Earth Lighting Belmont 1-Light 12-in Satin Bronze LED Flush Mount Light
$109.98
- The Belmont 48-in LED flush mount light emits 5600 lumens using only 63.35 watts
- Smooth light technology limits hot spots for an even light distribution and a light Color Temperature of 4000K Cool White
- Quality steel construction in bronze finish with gloss white acrylic diffuser
SKU: 755284018080
Categories: Ceiling Lights, Flush Mount Lighting, Lighting & Ceiling Fans
Tags: Bronze Flush Mount Lighting, Damp rated Flush Mount Lighting, Flush mount light Flush Mount Lighting, Good Earth Lighting Flush Mount Lighting, Indoor Flush Mount Lighting, Indoor Pendant Lighting, Large (more than 30 inches wide) Flush Mount Lighting, LED Flush Mount Lighting, Mini Flush Mount Lighting, Rectangle Flush Mount Lighting, Rectangular Flush Mount Lighting, Shaded Flush Mount Lighting, Standard Flush Mount Lighting, Traditional Flush Mount Lighting
Description
Flush mount lighting is one of the most popular types of lighting fixtures because it is easy-to-install and coordinates well with a wide variety of decor. The Good Earth design team has combined these efficient technologies with outstanding style. Flush mount lighting comes in many different sizes, shapes, and colors so that you can find the perfect lighting fixture for your home. No matter the room you decide to brighten up, LED lights in your new flush mounted lighting fixture will absolutely transform your home. It is also a great lighting solution if you want to make a statement by complementing it with other accent lights. Value, measured in terms of affordable initial investment, low energy consumption, and reduced long term maintenance costs, has been a key to the success of Good Earth brand.
- The Belmont 48-in LED flush mount light emits 5600 lumens using only 63.35 watts
- Smooth light technology limits hot spots for an even light distribution and a light Color Temperature of 4000K Cool White
- Quality steel construction in bronze finish with gloss white acrylic diffuser
- Dimmable down from 100 percent to 15 percent and works with most existing and new wall triac dimmers
- Long-lasting, energy-efficient LEDs with an estimated rated life of 50,000 hours
- ETL certified: Tested for both safety and performance for consumer use, damp location rated
- Peace of mind with 5-year limited manufacture warranty
Additional information
Weight | 8.0 kg |
---|---|
Dimensions | 13.35 × 3.7 × 50.0 cm |
Brand | Good Earth Lighting |
Reviews (7)
7 reviews for Good Earth Lighting Belmont 1-Light 12-in Satin Bronze LED Flush Mount Light
Add a review Cancel reply
Related products
Lamps & Lamp Shades
True Fine 28-in Bronze LED 3-way Table Lamp with Fabric Shade (Set of 2)
$88.98
Ceiling Fan Parts & Accessories
Rated 3.00 out of 5
$99.30
$99.00
Lamps & Lamp Shades
Home Accessories Inc Jewel 19-in Bronze Table Lamp with Glass Shade
$119.00
Ceiling Lights
$109.98
Ceiling Lights
Galaxy Lighting Traditional 1-Light Black Aluminum Flush Mount with White Marbleized Glass Shade
Rated 3.00 out of 5
$88.98
Ceiling Fan Accessories
Rated 5.00 out of 5
$88.90
Anonymous –
I started having my nearly 10 year old fluorescent lights just stopped working so I purchased these to replace. Wiring layout is different – old wiring was pulled through the old fluorescent fixture; with these, it has to be above the fixture in the ceiling making it a little more challenging. I tried using the supplied plastic anchors on one fixture and both broke without making a dent in the ceiling. The mounting holes did not line up with the older fixture but I was able to use the older ceiling holes and some toggle bolts (the old ceiling mount holes were either too wide by quite a bit or a bit too narrow but I used the “a bit too narrow alignment and it worked OK). After fussing with the first fixture, I adopted the same final mounting on all subsequent fixtures and everything went smoothly (and I threw out the plastic anchors). The difficult part is getting the wiring done without the fixture falling. There is a short chain included which you use to hold the fixture up near the open junction box and exposed wiring. I got one side up with a long toggle bolt and used the chain which gives about 5 inches to work. The chain is somewhat precarious so you have to be careful (at least that’s what I found in my home). Then you have to push everything back into the junction box in the ceiling so the fixture will flush mount. This isn’t easy but doable. It would have been a lot easier if the wiring could have been pulled though the fixture and then connected and folded out of the way. The result is bright light (definitely not “warm”) and it provide much better visibility. We have in the service porch, closet, pantry and they provide excellent lighting.
Anonymous –
Needed to see inside the fixture. Sales person had no knowledge of product.
Anonymous –
Like others, we replaced our old fluorescent fixture in the kitchen. Wanted to be sure brighter than the old light so researched you want 5,000 lumens and over. I would say this is too bright for our 10 x 10 kitchen! We will get the dimmer switch to it and if for some reason we need it super bright we can adjust it. It is a one person job if you are buff and have long arms. Our house was built in 1969 and the junction box was a tad bit narrower so that we had a hard time screwing in the universal plate so that the mounting screws would not hit the sides of the junction box. The mounting screws for the fixture on the plate were spaced a bit too narrow for the fixture so that was a big problem, too. We ended up having to turn 90 degrees where we really wanted it. Took us about 3 hours to install to get around our problems, but I would say compared to other problems in life you could have, it was alright. I am glad it is too bright instead of too dim.
Anonymous –
The light fixture is attractive and provides enough light for all kitchen work areas. The dimmer allows the light to be on when I’m not in the kitchen.
Anonymous –
Well designed, easy to install, very bright. I got my kitchen back! Because of the height, 14 ft, I utilized Loews to install this item, perfect choice. The experienced electrician read the directions which detailed the use of an installation chain to hold the assembly while the wiring was being done. One man operation! No prob!
I had read some reviews on this item and was influenced, incorrectly, by someone who needed more than one person to install and gave this a poor review. Wrong, you really should read the directions and then maybe offer a better rating with less frustration. I usually read all the reviews and make my own decision. That tact worked in this case.
No issues with the installation tech showing up. I think I’ll do that again.
Anonymous –
Bought to replace florescent fixture in galley kitchen. Had installed by electrician with new dimmer switch. Install went smooth. Very happy with light using max brightness. Quite a difference. Nice simple look and good amount of light. Would suggest dimmer to control brightness. Just be aware that light is fixed at 4000k which I found good for kitchen. Some other lights are adjustable. For my use fixture was perfect. Do your research prior to purchase to avoid any issues.
Anonymous –
The light looks good & provides the right amount of light fot my kitchen. The installer did a great job. Would reccomend